Annual Maintenance Benefits
Keeping Your Investment Running
The team at The King's Company knows that unexpected repairs and replacements of heating, cooling, water heating and other comfort systems can be a burden. That is why our team of experts provides a thorough maintenace agreement to ensure that your comfort systems keep running correctly and efficiently for years to come.
| PLAN COVERAGE | Oil with AC | Furnace & AC | Heat Pump with Furnace | Heat Pump |
|---|---|---|---|---|
| TUNE-UPS PER YEAR | 2 | 2 | 2 | 1 |
| DISCOUNT ON REPAIRS | 20% | 15% | 10% | 10% |
| WARRANTY ON REPAIRS | 90 DAY | 60 DAY | 60 DAY | 30 DAY |
| SERVICE CALL FEE | $0.00 included:1 media filter,1 humidifier pad,1 UV standard single bulb replacement per year |
$65.00 included: 2 standard filters and 1 humidifier pad, 2 EAC cleaning |
STANDARD FEE | STANDARD FEE |
| COST OF PLAN | $350/YR | $225/YR | $275/YR | $225/YR |
**Service agreement price for heat pump and furnace is $225**
All agreements come with no after hour/weekend overtime charges on EMERGENCY service.
*Full Coverage Warranty Details
Our limited full coverage warranty will replace or repair most standard defective components on the following types of residential units: Furnace, AHU, Condensing A/C units and Heat Pumps. Not all components will be covered under full coverage warranty. Exempt parts excluded from full coverage warranty consist of the following: Heat exchanger, compressors, smart gas valves, wifi/communicating thermostats. Full coverage warranty is available for qualified HVAC equipment only. HVAC equipment must undergo a passing inspection by a TKC technician to qualify. Units older than 18 years of age from manufacturing date will not qualify for full coverage warranty.
Cooling System Tune-up Inspection
- Test all wiring and connectors
- Test condensate drain and pump
- Clean condensate trap
- Inspect compressor contractors
- Inspect filter
- Inspect Air Cleaner
- Inspect belt and adjust tension
- Clean condenser coil
- Test motor
- Test thermostat set time clear notices
- Test system operation/evaluate performance
Heating System Tune-up Inspection
- Inspect burners, pilot assembly and sensors
- Clean sensors, burners thermocouple
- Safety Test heat exchanger for cracks or damage
- Clean accessible evaporator coil
- CO and gas leak test
- Test and lubricate blower motor and moving parts if necessary
- Test flue for proper draft
- Test humidifier
- Clean sensors, burners thermocouple
- Inspect air for burner efficiency
- Test fan limit controls
- Test wiring
- Test condensate drain and pump
- Test and clean condensate trap
- Test thermostat
- Test safety controls
- Test pressure switches
- Visual inspection of hot water heater
- Inspect furnace filter
- Inspect air cleaner
- Test system operation/Evaluate performance